MEMBERS LOGIN CONTACT

STANDARDIZATION

  1. INDEX
  2. STANDARDIZATION

NATIONAL STANDARDS BODY

What is the National Standards Body?


The National Standards Body (ONN) was created as a legal entity on July 29, 2005 to carry out voluntary standardization activities, by creating, reviewing, updating, issuing and withdrawing Mexican standards in all areas related to iron and steel industry and to participate in national and international standardization activities. Its performance is governed by law, based on the Metrology and Standardization Federal Law and its Regulation. Standardization work is carried out by the Steel Industry National Standardization Technical Committee (COTENNIS) which contributes to standardization policy and coordinates CANACERO’s activities on the subject.

OBJECTIVES

To develop the Mexican standards used in the manufacture and consumption of iron and steel products, which have been agreed upon by all sectors. To have updated regulations acting as guidelines for developing products, processes, test methods and other iron and steel-related activities. To participate in national and international standardization for the development of new technologies.

MISSION

To create and update the Mexican standards for the iron and steel industry, being committed to all actors that take part in the process of drafting the regulations without excluding any stakeholder, always providing quality services based on respect, teamwork, ethics and compliance with the legal framework.

VISION

To be the National Standardization Body for the iron and steel industry, serving as benchmark, meeting effectively and efficiently the requirements of manufacturers and consumers of iron and steel products, and developing standards that foster iron and steel industry technology in benefit of our sector and society.

COTENNIS President

General Director

Sustainable Development, Energy and Standardization Director

Administrative Director

Standardization and Quality Deputy Director

  • Subcommittees

  • Task Forces
    • The National Standardization Technical Committee of the Steel Industry (COTENNIS), was established on August 26, 1965 and is currently integrated by ten subcommittees and two task forces:

    Subcommittees:

    Stainless steel
    Wire rod and wire
    Raw material
    Test Methods
    Longs products
    Plate and sheet
    Tubes
    Welding
    Miscellaneous
    Non-Destructive Testing


    Task Forces
  • Physical Test Methods
  • Coated sheet

    • National Quality Infrastructure Program: It is an instrument for planning, conducting, coordinating and informing the activities of normalization, standardization and metrology at the national level. The Program must be aligned with the National Development Plan, as well as with the sectoral programs of the Standardizing Authorities. (Article 29, LIC)

    Annual Standardization Programs:
  • Supplement to the NSP, 2023[DOWNLOAD]
  • Annual Quality Infrastructure Program PNIC 2023[DOWNLOAD]
  • Supplement to the NSP, 2022[DOWNLOAD]
  • Annual Quality Infrastructure Program PNIC 2022[DOWNLOAD]
  • Annual Quality Infrastructure Program PNIC 2021[DOWNLOAD]
  • Annual Standardization Program 2020[DOWNLOAD]
  • Annual Standardization Program 2019[DOWNLOAD]
  • Supplement to the NSP, 2018 [DOWNLOAD]
  • Annual Standardization Program 2018 [DOWNLOAD]
  • Supplement to the NSP, 2017 [DOWNLOAD]
  • Annual Standardization Program 2017 [DOWNLOAD]
  • Annual Standardization Program 2016 [DOWNLOAD]
  • Supplement to the NSP, 2015 [DOWNLOAD]
  • Annual Standardization Program 2015 [DOWNLOAD]
  • Annual Standardization Program 2014 [DOWNLOAD]
  • Annual Standardization Program 2013 [DOWNLOAD]
    • If you are interested in participating in the development of Mexican standards, comment on standardization projects or need an existing standard, please contact the standardization staff.
    Head of Standardization and Quality Department:
  • Ing. Giovanna Ramírez G.
  • Email: gramirez@canacero.mx
  • ONN Email: onn@canacero.org.mx
    • DOWNLOAD OUR

    STANDARDS CATALOG

    DOWNLOAD CATALOG
    STEEL IN THE NEW COMPLEMENTARY RULES OF MEXICO CITY

    CONSTRUCTION REGULATIONS
    (NTCRC of CDMX)

    DOWNLOAD DIAGRAM
    NMX-B-001-CANACERO-2009  
    METHODS FOR CHEMICAL ANALYSIS OF STEEL AND CAST IRON TEST METHODS
    Publication DOF:   2010-02-19 |  Entry into Force:  2010-04-20

    NMX-B-013-CANACERO-2016  
    ZINC-COATED STEEL CHAIN-LINK FENCE-SPECIFICATION AND TEST METHODS
    Publication DOF:   2016-10-20 |  Entry into Force:  2016-12-19

    NMX-B-019-CANACERO-2020  
    EXPRESSION AND DEFINITIONS USED IN SIDERURGICAL INDUSTRY
    Publication DOF:   2022-04-22 |  Entry into Force:  2022-06-21

    NMX-B-029-CANACERO-2020  
    TEST METHOD FOR YOUNG´S MODULUS, TANGENT MODULUS, AND CHORD MODULUS
    Publication DOF:   2022-04-22 |  Entry into Force:  2022-06-21

    NMX-B-039-CANACERO-2019  
    DETERMINATION OF THE DEPTH OF DESCARBURIZATION OF STEELS AND IRON
    Publication DOF:   2019-08-06 |  Entry into Force:  2019-10-06

    NMX-B-040-CANACERO-2012  
    FERROMANGANESE SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2012-12-29 |  Entry into Force:  2013-02-17

    NMX-B-048-CANACERO-2012  
    FERROSILICON SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2012-12-14 |  Entry into Force:  2013-02-12

    NMX-B-072-CANACERO-2017  
    DEFORMED STEEL BAR,GRADE 60, COLD ROLLED FOR CONCRETE REINFORCEMENT SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2017-02-27 |  Entry into Force:  2017-04-28

    NMX-B-079-CANACERO-2018  
    MÉTODS OF PREPARATION METALOGRAFHIC SPECIMENS.
    Publication DOF:   2019-02-26 |  Entry into Force:  2019-04-27

    NMX-B-085-CANACERO-2005  

    Publication DOF:   2006-04-27 |  Entry into Force:  2006-06-26

    NMX-B-085-CANACERO-2020  
    TRIPLE HEXAGONAL MESH GABIONS AND REVET MATTRESSES - SPECIFICATIONS
    Publication DOF:   2022-04-26 |  Entry into Force:  2022-06-24

    NMX-B-086-CANACERO-2020  
    NON-DESTRUCTIVE TESTING - RADIOGRAPHIC TESTING OF METALLIC MATERIALS USING FILM AND X - OR GAMMA RAYS - BASIC RULES
    Publication DOF:   2022-04-26 |  Entry into Force:  2022-06-24

    NMX-B-089-CANACERO-2008  
    SIDERGURGICAL INDUSTRY DEFINITIONS AND EXPRESIONS RELATING TO HEAT TREATMENTS OF IRON AND STEEL
    Publication DOF:   2008-11-07 |  Entry into Force:  2009-01-06

    NMX-B-089-CANACERO-2020  
    DEFINITIONS AND EXPRESSIONS RELATING TO HEAT TREATMENTS OF IRON AND STEEL
    Publication DOF:   2022-04-26 |  Entry into Force:  2022-06-24

    NMX-B-092-CANACERO-2007  
    MOLYBDENIUM TRIOXIDE - SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2008-01-14 |  Entry into Force:  2008-03-14

    NMX-B-113-CANACERO-2015  
    BEND TEST FOR STEEL PRODUCTS
    Publication DOF:   2016-02-17 |  Entry into Force:  2016-04-17

    NMX-B-116-CANACERO-2019  
    BRINELL HARDNESS OF METALLIC MATERIALS -TEST METHOD
    Publication DOF:   2022-04-26 |  Entry into Force:  2022-06-24

    NMX-B-118-CANACERO-2020  
    TEST METHODS FOR VICKERS HARDNESS AND KNOOP HARDNESS OF METALLIC MATERIALS
    Publication DOF:   2022-04-26 |  Entry into Force:  2022-06-24

    NMX-B-119-CANACERO-2017  
    ROCKWELL HARDNESS AND ROCKWELL SUPERFICIAL HARDNESS OF IRON AND STEEL PRODUCTS TEST METHOD
    Publication DOF:   2017-12-13 |  Entry into Force:  2018-02-12

    NMX-B-120-CANACERO-2018  
    IMPACT TESTING OF METALLIC MATERIALS
    Publication DOF:   2019-08-13 |  Entry into Force:  2019-10-13

    NMX-B-124-CANACERO-2011  
    MAGNETIC PARTICLE TESTING- SPECIFICATIONS
    Publication DOF:   2011-03-03 |  Entry into Force:  2011-05-02

    NMX-B-133-CANACERO-2009  
    PENETRAT INSPECTION- SPECIFICATIONS
    Publication DOF:   2010-02-19 |  Entry into Force:  2010-04-20

    NMX-B-169-CANACERO-2012  
    SAMPLING AND SAMPLE PREPARATIONS FOR DETERMINATION OF CHEMICAL COMPOSITION OF FERROALLOYS AND DETERMINATION OF SIZE
    Publication DOF:   2013-08-07 |  Entry into Force:  2013-10-06

    NMX-B-172-CANACERO-2018  
    MECHANICAL TEST FOR STEEL AND IRON PRODUCTS
    Publication DOF:   2018-11-01 |  Entry into Force:  2019-01-01

    NMX-B-176-CANACERO-2015  
    SEAMLESS AND WELDED AUSTENITIC STAINLESS STEEL SANITARY TUBING SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2015-05-21 |  Entry into Force:  2015-07-20

    NMX-B-185-CANACERO-2013  

    Publication DOF:   2014-05-22 |  Entry into Force:  2014-07-21

    NMX-B-198-CANACERO-2020  
    WELDED AND SEAMLESS STEEL PIPES PILES - SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2022-04-27 |  Entry into Force:  2022-06-25

    NMX-B-200-CANACERO-2021  
    HOT FORMED WELDED AND SEAMLESS CARBON STEEL STRUCTURAL TUBING
    Publication DOF:   2022-09-06 |  Entry into Force:  2022-11-05

    NMX-B-218-CANACERO-2013  

    Publication DOF:   2014-12-08 |  Entry into Force:  2015-02-06

    NMX-B-220-CANACERO-2012  
    FERROCHROMIUM-SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2012-12-14 |  Entry into Force:  2013-02-12

    NMX-B-221-CANACERO-2012  
    SIDERRURGICAL INDUSTRY-FERROBORON-SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2013-08-07 |  Entry into Force:  2013-10-06

    NMX-B-222-CANACERO-2012  
    FERROTITANIUM- SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2013-04-15 |  Entry into Force:  2013-06-14

    NMX-B-223-CANACERO-2012  

    Publication DOF:   2013-08-07 |  Entry into Force:  2013-10-06

    NMX-B-224-CANACERO-2012  
    FERROVANADIUM- SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2013-11-13 |  Entry into Force:  2014-01-12

    NMX-B-225-CANACERO-2012  
    FERROTUNGSTEN- SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2013-11-13 |  Entry into Force:  2014-01-02

    NMX-B-227-CANACERO-2012  
    SILICOMANGANESES- SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2013-11-13 |  Entry into Force:  2014-01-12

    NMX-B-228-CANACERO-2008  

    Publication DOF:   2008-11-07 |  Entry into Force:  2009-01-06

    NMX-B-229-CANACERO-2011  
    SEAMLESS AND WELDED AUSTENITIC STAINLESS STEEL TUBING FOR GENERAL SERVICE SPECIFICATIONS ANS TEST METHODS
    Publication DOF:   2011-10-17 |  Entry into Force:  2011-12-16

    NMX-B-233-CANACERO-2008  
    FERRONICKEL - SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2008-10-08 |  Entry into Force:  2008-12-07

    NMX-B-234-CANACERO-2007  
    CALCIUM- SILICON AND CALCIUM -MANGANESE-SILICON -SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2008-01-14 |  Entry into Force:  2008-03-14

    NMX-B-235-CANACERO-2007  
    FERROPHOSPHORUS- SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2008-01-14 |  Entry into Force:  2008-03-14

    NMX-B-236-CANACERO-2008  

    Publication DOF:   2008-11-07 |  Entry into Force:  2009-01-06

    NMX-B-237-CANACERO-2013  

    Publication DOF:   2014-12-08 |  Entry into Force:  2015-02-06

    NMX-B-242-CANACERO-2009  
    PRESSURE VESSEL PLATES,CARBON STEEL, LOW AND INTERMEDIATE TENSILE STRENGHT - SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2010-01-20 |  Entry into Force:  2010-03-21

    NMX-B-243-CANACERO-2009  
    PRESSURE VESSEL PLATES, CARBON STEEL HIGH STRENGHT- MANGANESE-SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2010-01-20 |  Entry into Force:  2010-03-21

    NMX-B-244-CANACERO-2011  
    PRESSURE VESSEL PLATES, CARBON STEEL, FOR INTERMEDIATE- AND HIGHER- TEMPERATURE SERVICE-SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2011-06-03 |  Entry into Force:  2011-08-02

    NMX-B-245-CANACERO-2009  
    PRESSURE VESSEL PLATES CARBON STEEL FROM MODERATE AND LOWER TEMPERATURE SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2010-01-20 |  Entry into Force:  2010-03-21

    NMX-B-248-CANACERO-2006  
    STEEL CARBON, HIGHSTRNGTH LOW ALLOY AND HIGH STRENGTH LOW ALLOY WITH IMPROVED FORMABILITY HOT ROLLED, COMMERCIAL DRAWING AND STRUCTURAL, IN COILS SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2007-04-02 |  Entry into Force:  2007-06-01

    NMX-B-253-CANACERO-2020  
    STEEL INDUSTRY - STEEL WIRE PLAIN OR DEFORMED FOR CONCRETE REINFORCEMENT -SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2021-08-09 |  Entry into Force:  2021-10-09

    NMX-B-254-CANACERO-2008  
    STRUCTURAL STEEL SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2008-11-07 |  Entry into Force:  2009-01-06

    NMX-B-259-CANACERO-2009  
    PRESSURE VESSEL PLÑATES, CARBON STTEL, HIGH STRENGHT, FOR MODERATE AND LOWER TEMPERATURE SERVICE SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2010-01-20 |  Entry into Force:  2010-03-21

    NMX-B-262-CANACERO-2019  
    STANDARD TEST SPECIFICATION FOR STRUCTURAL STEEL FOR SHIPS
    Publication DOF:   2020-03-26 |  Entry into Force:  2020-05-25

    NMX-B-268-CANACERO-2017  
    CHEMICAL COMPOSITION AND HARDENABILITY FOR CARBON AND ALLOY H STEELS
    Publication DOF:   2017-03-17 |  Entry into Force:  2017-05-16

    NMX-B-284-CANACERO-2017  
    HIGH-STRENGTH LOW-ALL- STRUCTURAL MANGANESE VANADIUM STEEL
    Publication DOF:   2017-06-27 |  Entry into Force:  2017-08-27

    NMX-B-290-CANACERO-2021  
    STEEL WELDED WIRE PLAIN AND DEFORMED FABRIC FOR CONCRETE REINFORCEMENT SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2022-09-06 |  Entry into Force:  2022-11-05

    NMX-B-292-CANACERO-2018  
    UNCOATED SEVEN WIRE STRESS RELIEVED STEEL STRAND FOR PRESTRESSED CONCRETE SPECIFICATIONS AND TEST METHODS.
    Publication DOF:   2019-03-13 |  Entry into Force:  2019-05-12

    NMX-B-293-CANACERO-2019  
    UNCOATED STRESS RELIEVED STEEL WIRE FOR PRESTRESSED CONCRETE SPECIFICATIONS AND TEST METHODS.
    Publication DOF:   2019-08-06 |  Entry into Force:  2019-10-06

    NMX-B-307-CANACERO-2015  
    METHODS FOR DETERMINING THE AVERAGE GRAIN SIZE
    Publication DOF:   2015-05-21 |  Entry into Force:  2015-07-20

    NMX-B-308-CANACERO-2017  
    STANDARD TEST METHODS FOR DETERMINING THE INCLUSION CONTEST OF STEEL.
    Publication DOF:   2017-12-13 |  Entry into Force:  2018-02-12

    NMX-B-309-CANACERO-2011  
    EXPRESSION AND DEFINITIONS USED IN MECHANICAL TESTING
    Publication DOF:   2011-07-08 |  Entry into Force:  2011-09-06

    NMX-B-313-CANACERO-2020  
    METHOD OF TEST FOR HARDNESS METALLIE MATERIALS BY PENETRATION USING
    Publication DOF:   2022-04-27 |  Entry into Force:  2022-06-25

    NMX-B-320-CANACERO-2021  
    STANDARD TEST METHOD FOR DETERMINING HARDENABILITY OF STEEL (JOMINY TEST)
    Publication DOF:   2022-04-27 |  Entry into Force:  2022-06-25

    NMX-B-323-CANACERO-2006  
    STEEL CLASIFICATION AND DESIGNATION BY CHEMICAL COMPOSITION
    Publication DOF:   2007-03-16 |  Entry into Force:  2007-05-15

    NMX-B-324-CANACERO-2006  
    CARBON STEEL CHEMICAL COMPOSITION SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2007-03-16 |  Entry into Force:  2007-05-15

    NMX-B-325-CANACERO-2019  
    CHEMICAL COMPOSITION FOR ALLOY STEELS - SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2019-10-02 |  Entry into Force:  2019-12-02

    NMX-B-328-CANACERO-2006  
    ALLOWABLE TOLERANCES IN THE CHEMICAL LIMITS SPECIFIED FOR FORGED OR ROLLED STEELS SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2007-04-02 |  Entry into Force:  2007-06-01

    NMX-B-331-CANACERO-2016  
    MACROERCH TESTING, FOR STEEL PRODUCTS
    Publication DOF:   2016-10-17 |  Entry into Force:  2016-12-16

    NMX-B-365-CANACERO-2017  
    WIRE ROD,CARBON STEEL FOR DRAWING SPECIFICATION AND TEST METHODS
    Publication DOF:   2017-02-27 |  Entry into Force:  2017-04-28

    NMX-B-366-CANACERO-2016  
    STEEL WIRE, COLD-DRAWN, FOR COILED-TYPE SPRINGS
    Publication DOF:   2016-10-20 |  Entry into Force:  2016-12-19

    NMX-B-432-CANACERO-2015  
    CHEMICAL ANALYSIS METHOD FOR PHOSPHORUS DETERMINATION IN IRON ORES
    Publication DOF:   2015-05-21 |  Entry into Force:  2015-07-20

    NMX-B-449-CANACERO-2017  
    FERROALLOYS CHEMICAL ANALYSIS
    Publication DOF:   2017-08-29 |  Entry into Force:  2017-10-28

    NMX-B-455-CANACERO-2021  
    PREFABRICATRED LATTICE RIB FOR BLOCK FLOOR FRAME SPECIFICATION AND TEST METHODS
    Publication DOF:   2022-09-08 |  Entry into Force:  2022-11-07

    NMX-B-456-CANACERO-2017  
    PREFABRICATED WELDED ELEMENT FOR BRICK MASONRY FRAMES REINFORCEMENT SPECIFICATION AND TEST METHODS
    Publication DOF:   2017-03-06 |  Entry into Force:  2017-05-05

    NMX-B-457-CANACERO-2019  
    ALLOYED DEFORMED STEEL BAR FOR REINFORCEMENT CONCRETE SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2019-10-07 |  Entry into Force:  2019-12-07

    NMX-B-462-CANACERO-2011  
    IMAGE QUALITY OF RADIOGRAPHS SPECIFICATIONS
    Publication DOF:   2011-07-07 |  Entry into Force:  2011-09-05

    NMX-B-475-CANACERO-2011  
    PRESSURE VESSEL PLATES STEEL LOW ALLOY HIGH STRENGTH SPECIFICATION AND TEST METHODS
    Publication DOF:   2011-06-03 |  Entry into Force:  2011-08-02

    NMX-B-480-CANACERO-2011  
    SHAPE AND PLATE LIGH STRENGTH LOW ALLOY STEEL MANGANESE- COLOMBIUM VANADIUM FOR STRUCTURAL USE -SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2011-06-03 |  Entry into Force:  2011-08-02

    NMX-B-482-CANACERO-2016  
    TRAINING, QUALIFICATION AND CERTIFICATION OF NON DESTRUCTIVE TESTING PERSONNEL
    Publication DOF:   2016-10-20 |  Entry into Force:  2016-12-19

    NMX-B-500-CANACERO-2021  
    MASONRY JOINT REINFORCEMENT - SPECIFITACTIONS AND TEST METHODS
    Publication DOF:   2022-09-06 |  Entry into Force:  2022-11-05

    NMX-B-501-CANACERO-2008  
    ELECTROLYTIC MANGANESE SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2008-10-08 |  Entry into Force:  2008-12-07

    NMX-B-502-CANACERO-2009  
    ELECTROLYTIC NICKEL SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2010-01-20 |  Entry into Force:  2010-03-21

    NMX-B-503-CANACERO-2017  
    SPECIFICATIONS FOR STEEL WIRE, CARBON, FOR GENERAL USE SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2017-03-17 |  Entry into Force:  2017-05-16

    NMX-B-504-CANACERO-2011  
    SIDERURGCIAL INDUSTRY DUCTILE IRON PIPES AND THERI JOINTS FOR WATER CONVEYANCE SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2012-01-26 |  Entry into Force:  2012-03-26

    NMX-B-505-CANACERO-2018  
    NAILS-SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2019-02-25 |  Entry into Force:  2019-04-26

    NMX-B-506-CANACERO-2019  
    DEFORMED STEEL BAR FOR REINFORCEMENT CONCRETE SPECIFICATION AND TEST METHOD
    Publication DOF:   2019-10-07 |  Entry into Force:  2019-12-07

    NMX-B-507-CANACERO-2017  
    STANDARD SPECIFICATIONS FOR ZINC COATED (GALVANIZED) CARBON STEEL WIRE
    Publication DOF:   2017-04-26 |  Entry into Force:  2017-06-25

    NMX-B-508-CANACERO-2011  
    CHROMIUM AND CHROMIUM NICKEL STAINLESS STEEL PLATES AND SHEET AND STRIP FPR PRESSURE VESSELS AND FOR GENERAL APLICARIONS SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2012-06-19 |  Entry into Force:  2012-08-18

    NMX-B-509-CANACERO-2012  
    WELDED STAINLESS STEEL MECHANICAL TUBING SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2013-04-15 |  Entry into Force:  2013-06-14

    NMX-B-510-CANACERO-2013  
    STEEL PIPES FOR POTABLE WATER AND SANITORY SEWER CONDUCTION SPECIFICATION AND TEST METHODS
    Publication DOF:   2014-08-13 |  Entry into Force:  2014-10-12

    NMX-B-512-CANACERO-2017  
    STANDARD SPECIFICATIONS FOR COLD ROLLED MAGNETIC LAMINATION QUALITY STEEL, SEMIPROCESSED TYPES
    Publication DOF:   2017-08-23 |  Entry into Force:  2017-10-22

    NMX-B-516-CANACERO-2017  
    STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS OF OIL AND NATURAL GAS AND OTHER FLUIDS
    Publication DOF:   2018-03-22 |  Entry into Force:  2018-05-22

    NMX-B-517-CANACERO-2017  
    GENERAL REQUIREMENTS FOR ALLOYS AND STAINLESS STEEL PIPE - SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2017-08-29 |  Entry into Force:  2017-10-29

    NMX-B-518-CANACERO-2017  
    STANDARD SPECIFICATION FOR ZINC-ALUMINIUM OATED CARBON STEEL WIRE SPECIFICTIONS AND TEST METHODS
    Publication DOF:   2017-08-29 |  Entry into Force:  2017-10-28

    NMX-B-519-CANACERO-2018  
    GENERAL REQUIREMENTS FOR FLAT ROLLED STAINLESS AND HEAT RESISTING STEEL PLATE, SHEET, AND STRIP.
    Publication DOF:   2018-01-19 |  Entry into Force:  2018-08-26

    NMX-B-520-2-CANACERO-2019  
    TERMS AND DEFINITIONS USED FOR NONDESTRUCTIVE TESTING- PART 2 VOLUMETRIC METHODS
    Publication DOF:   2019-07-05 |  Entry into Force:  2019-09-04

    NMX-B-520-CANACERO-2018  
    TERMS AND DEFINITIONS USED FOR NONDESTRUCTIVE TESTING - PART 1 SURFACE METHODS.
    Publication DOF:   2019-03-12 |  Entry into Force:  2019-05-10

    NMX-B-521-CANACERO-2018  
    CANISTER DOWLELS FLAT STEEL WIRE AND ROUND BAR OR CORRUDA TED FOR CONCRETE REINFORCEMENTE
    Publication DOF:   2018-06-11 |  Entry into Force:  2018-08-12

    NMX-B-522-CANACERO-2020  
    DEFORMED AND PLAIN STAINLESS BARS FOR CONCRETE REINFORCEMENT
    Publication DOF:   2021-06-16 |  Entry into Force:  2021-08-16

    NMX-B-523-CANACERO-2019  
    ULTRASONIC THICKNESS MEASUREMENT
    Publication DOF:   2019-10-25 |  Entry into Force:  2019-12-26

    NMX-B-524-CANACERO-2019  
    ULTRASONIC TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC THICKNESS MEASURING EQUIPMENT
    Publication DOF:   2020-03-26 |  Entry into Force:  2020-05-25

    NMX-B-525-CANACERO-2019  
    EXHIBITORS OF WIRE OF STEEL - SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2019-10-02 |  Entry into Force:  2019-12-02

    NMX-B-526-CANACERO-2020  
    STAINLESS STEEL FLEXIBLE FITTING FOR DRINKING WATER SUPPLY SYSTEMS
    Publication DOF:   2022-04-27 |  Entry into Force:  2022-06-25

    NMX-B-527-CANACERO-2020  
    TEST METHOD FOR DETERMINING AVERAGE GRAIN SIZE USING DIGITALIZED IMAGE ANALYSIS
    Publication DOF:   2022-04-28 |  Entry into Force:  2022-06-26

    NMX-B-528-CANACERO-2020  
    EVALUATION OF ULTRASONIC PULSE ? ECHO TESTING SYSTEMS WITHOUT THE USE OF ELECTRONIC MEASUREMENT INSTRUMENTS
    Publication DOF:   2022-04-28 |  Entry into Force:  2022-06-26

    NMX-B-529-CANACERO-2020  
    WROUGHT AUSTENITIC STAINLESS-STEEL PIPING FITTINGS
    Publication DOF:   2022-04-28 |  Entry into Force:  2022-06-26

    NMX-B-532-1-CANACERO-2021  
    NON-DESTRUCTIVE TESTING OF WELDS ? RADIOGRAPHIC TESTING - PART 1: X AND GAMMA - RAY TECHNIQUES
    Publication DOF:   2022-04-28 |  Entry into Force:  2022-06-26

    NMX-B-533-CANACERO-2021  
    METALLIC COATED STEEL-WOVEN WIRE FENCE FABRIC ? SPECIFICATIONS ANDA TEST METHODS
    Publication DOF:   2022-04-28 |  Entry into Force:  2022-06-26

    NMX-H-014-CANACERO-2021  
    STANDARD TEST METHOD FOR MASS OF COATING ON IRON AND STEEL ARTICLES WITH ZINC OR ZINC - ALLOY COATING
    Publication DOF:   2022-04-29 |  Entry into Force:  2022-06-27

    NMX-H-077-CANACERO-2017  
    CARBON STEEK ELECTRODES FOR SHIELDED METAL ARC WELDING SPECIFICATION
    Publication DOF:   2017-08-29 |  Entry into Force:  2017-10-29

    NMX-H-082-CANACERO-2020  
    PROCUREMENT GUIDELINES FOR CONSUMABLES - WELDING AND ALLIEN PROCESSES - FLUX AND GAS SHIELDED ELECTRICAL WELDING PROCESSES
    Publication DOF:   2022-04-29 |  Entry into Force:  2022-06-27

    NMX-H-086-CANACERO-2011  
    LOW ALLOY STEEL COVERED ARC WELDING ELECTRODES- SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2012-06-19 |  Entry into Force:  2012-08-18

    NMX-H-091-CANACERO-2013  
    STAINLESS STEEL ELECTRODE FOR SHIELDED METAL ARC WELDING-SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2014-12-08 |  Entry into Force:  2015-02-06

    NMX-H-097-CANACERO-2021  
    CARBON STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2022-04-29 |  Entry into Force:  2022-06-27

    NMX-H-099-CANACERO-2016  
    CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING- SPECIFICATIONS AND TEST METHODS
    Publication DOF:   2016-10-20 |  Entry into Force:  2016-12-19

    NMX-H-106-CANACERO-2018  
    SPECIFICATION FOR NICKEL AND NICKEL-ALLOY-WELDING ELECTRODES FOR SHIELDED METAL ARC WELDING
    Publication DOF:   2019-08-06 |  Entry into Force:  2019-10-06

    NMX-H-108-CANACERO-2019  
    SPECIFICATION FOR CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING
    Publication DOF:   2020-03-26 |  Entry into Force:  2020-05-25

    NMX-H-127-CANACERO-2019  
    REPAIR OF DAMAGED AND UNCOATED AREAS OF HOT DIP GALVANIZED COATINGS.
    Publication DOF:   2019-08-06 |  Entry into Force:  2019-10-06

     

     
    NMX-B-007-1996  

    Publication in DOF:    2010-01-21 

    NMX-B-078-1987  

    Publication in DOF:    2008-10-09 

    NMX-B-100-1988  

    Publication in DOF:    2010-09-30 

    NMX-B-226-1987  

    Publication in DOF:    2009-01-26 

    NMX-B-232-1986  

    Publication in DOF:    2010-01-21 

    NMX-B-257-1997  

    Publication in DOF:    2007-04-07 

    NMX-B-258-1970  

    Publication in DOF:    2010-01-21 

    NMX-B-264-1997  

    Publication in DOF:    2007-04-02 

    NMX-B-273-1970  

    Publication in DOF:    2007-03-16 

    NMX-B-274-1970  

    Publication in DOF:    2007-03-16 

    NMX-B-347-1989  

    Publication in DOF:    2007-03-02 

    NMX-B-367-1986  

    Publication in DOF:    2010-01-21 

    NMX-H-004-1996  

    Publication in DOF:    2009-02-27 

    NMX-H-024-1994  

    Publication in DOF:    2008-10-09 

    NMX-H-028-1994  

    Publication in DOF:    2008-10-09 

    NMX-H-040-1980  

    Publication in DOF:    2008-10-09 

    NMX-H-045-1986  

    Publication in DOF:    2008-10-09 

    NMX-H-049-1994  

    Publication in DOF:    2008-10-09 

    NMX-H-074-1996  

    Publication in DOF:    2009-02-27 

    NMX-H-100-1991  

    Publication in DOF:    2008-10-09 

    NMX-H-101-1996  

    Publication in DOF:    2008-10-09 

    NMX-H-116-1988  

    Publication in DOF:    2008-10-09 

    NMX-O-087-1996  

    Publication in DOF:    2008-10-09 

    The National Chamber of the Iron and Steel Industry, National Organization for Standardization, actively participates in the work of International Standardization related to the Iron and Steel sector.

  • • We are part of the Mexican Committee for the attention of the ISO that coordinates the General Directorate of Standards of the Ministry of Economy; We are P Members in the TC 135 Non Destructive Testing of the International Organization for Standardization (ISO) and we participate in four Subcommittees that deal with the issues of Ultrasound, Surface Methods, radiography and qualification of personnel who perform non-destructive tests.

  • If you wish to participate in the analysis of documents and draft international standards to formulate positions of the Government of Mexico, please contact our standardization staff who will guide you in this regard (onn@canacero.org.mx).
    • DOWNLOAD TEMPLATE

    If you have any comments, please fill the attached form and send it to: onn@canacero.org.mx and gramirez@canacero.mx

    PROY-NMX-B-001-CANACERO-2021  
    METHODS FOR CHEMICAL ANAYLYSIS OF STEEL AND CAST IRON TEST METHODS
    Publication in DOF:    2022-04-29  | End Date:   2022-06-27 

    PROY-NMX-B-113-CANACERO-2021  
    BEND TEST FOR STEEL PRODUCTS
    Publication in DOF:    2022-04-29  | End Date:   2022-06-27 

    PROY-NMX-B-199-CANACERO-2022  
    COLD FORMED WELDED AND SEAMLESS CARBON STEEL STRUCTURAL TUBING
    Publication in DOF:    2022-08-24  | End Date:   2022-10-23 

    PROY-NMX-B-323-CANACERO-2021  
    STEEL CLASIFICATION AND DESIGNATION BY CHEMICAL COMPOSITION
    Publication in DOF:    2022-04-29  | End Date:   2022-06-27 

    PROY-NMX-B-461-CANACERO-2021  
    STEEL TUBES, LOW CARBON OR HIGH STRENGTH LOW ALLOW, TAPERED FOR STRUCTURAL USE
    Publication in DOF:    2022-04-29  | End Date:   2022-06-27 

    PROY-NMX-B-465-CANACERO-2021  
    ULTRASONIC - PULSE- ECHO STRAIGHT - BEAM - EXAMINATION BY CONTACT METHOD
    Publication in DOF:    2022-04-29  | End Date:   2022-06-27 

    PROY-NMX-B-530-CANACERO-2021  
    GENERAL REQUIREMENTS FOR FERRITIC ALLOY STEEL, AUSTENITIC ALLOY STEEL, AND STAINLESS ? STEEL TUBES
    Publication in DOF:    2022-04-28  | End Date:   2022-06-26 

    PROY-NMX-B-532-2-CANACERO-2021  
    NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING - PART 2: X AND GAMMA RAY TECHNIQUES WITH DIGITAL DECTECTORS
    Publication in DOF:    2022-04-28  | End Date:   2022-06-26 

    PROY-NMX-B-534-CANACERO-2021  
    FERRITIC STAINLESS - STEEL GRADE 441 EMPLOYED IN THE FOOD SERVICE SECTOR
    Publication in DOF:    2022-04-27  | End Date:   2022-06-25 

    PROY-NMX-B-535-CANACERO-2022  
    METALLIC MATERIALES- SHEET AND STRIP HOLE EXPANDING TEST
    Publication in DOF:    2022-09-06  | End Date:   2022-11-05 

    PROY-NMX-H-086-CANACERO-2021  
    LOW ALLOY STEEL COVERED ARC WELDING ELECTRODES - SPECIFICATIONS AND TEST METHODS
    Publication in DOF:    2022-04-27  | End Date:   2022-06-25 

    Send order to: onn@canacero.org.mx, gramirez@canacero.mx attaching the format "Canacero Standards Form” to your Email or call our Standardization Staff: Phone +52 (55) 5448 8177.